I have a 1990 3.0 v6 automatic Probe and I'm trying to get the alternator out.
Are there any simple solutions?
(1) Disconnect the negative battery cable. (2) Remove the accessory drive belt. Refer to Section 1. (3) Remove and set aside the windshield washer reservoir. (4) Remove the power steering pump reservoir return hose from the pump assembly. (5) Remove the power steering pump high pressure hose from the pump assembly. (6) Remove the upper and middle accessory support bracket mounting bolts. (7) Pull back on the idler tensioner, using a 1 / 2 in. drive breaker bar and remove the lower accessory support bracket mounting bolt. (8) Remove the mounting bolt from the side of the accessory bracket at the air conditioning compressor brace. (9) Raise the alternator/accessory support bracket to clear the engine and set aside carefully to remove the electrical connectors. (10) Disconnect the electrical connectors from the alternator. Place the alternator/accessory support bracket on a bench for alternator removal. (11) Remove the alternator pivot bolt and remove the mounting bolt from the back side of the alternator. Remove the alternator from the accessory
Here are some pictures:
Looking for a Used Probe in your area?
CarGurus has thousands of nationwide listings and the tools to find you a great deal.
Search Ford Probe Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Ford Probe Experts