Need help with dragging rear brakes on 91 festiva

30

Asked by dogbait Apr 02, 2011 at 03:55 AM about the 1991 Ford Festiva

Question type: Maintenance & Repair

just replaced my festiva rear brakes, new drums, wheel cylinders, pads and wheel bearings.  
Loosen the parking brake to the max, but the new pads are still dragging on the drums.  How do I
get the pads to stop dragging on the drums.  All parts were checked , cleaned and contact points
lubed but still no "free wheeling".  Please help,, email me at dogbait@sbcglobal.net ....Thanks
guys!

7 Answers

5,305

You need to make sure that the leading and trailing shoes are in the correct position. A lot of times the shoes are different sizes.

1 people found this helpful.

agreed with other poster,but you cant get it to free wheel by backing off on the parking break,their is a adjustment spline on bottom you need to back off on that .

1 people found this helpful.
30

There is no adjustment spline at the bottom. The only adjustment is connected to the parking lever which I have adjusted to the minimum of expansion for the shoes. I even tried putting a clamp to bring the shoes closer and left the bleeder valve open to insure the wheel cylinder is in the narrowest measurement. Stunned?

2 people found this helpful.
30

What is the leading shoe? The shoes all have the same markings on them. I am about ready to grind off a couple thousands off the part of the shoe that makes contact with the wheel cylinder top and bottom to bring them in closer. Would that be okay? Tried everything else.

1 people found this helpful.

at bottom their is no adjuster,has to be all rear drum breaks have it,it is also possable that the breaks were packaged wrong,and not for your car,I would take them back compair them to another set.

2 people found this helpful.
10

It's possible that your rear brake hoses may need replacing in addition to everything else you have already done. Over time, brake hoses deteriorate internally from pressure and heat to the point where the inner lining can start to act like a one-way valve: stepping on the brake pedal will force fluid through the system to apply the brakes, but there isn't enough back pressure to get the fluid to return through the bad hose. This has the effect of keeping your brakes pressurized at all times. Considering the age of the car and that the hoses might be original, it's very possible that replacing them might be the answer. I have a 1989 Festiva, and I just replaced everything that you did, plus both rear hoses, and now the brake system works like new. Hope this helps!

1 people found this helpful.

Your Answer:

Festiva

Looking for a Used Festiva in your area?

CarGurus has thousands of nationwide listings and the tools to find you a great deal.

Postal Code:

CarGurus Experts

  • #1
    Chris W
    Reputation
    2,070
  • #2
    jpdaddyof2
    Reputation
    130
  • #3
    Festiva78
    Reputation
    120
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Ford Fiesta
3 Great Deals out of 176 listings starting at $4,300

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.