I am having a problem getting thr 2003 mazada protege to start, it will crank, tries to start, you hear the cyl fire then quits. You do it again and it does the same thing. I hooked up fuel press

Asked by Papperair Jun 30, 2015 at 10:22 PM about the 2003 Mazda Protege

Question type: Maintenance & Repair

I have a problem with a 2003 mazada protege getting it to start.  It will crank ,  you hear
the cyl fire but quickly stops.  Do it again and it stops firing.  I hooked a fuel pressure
gage up on the return line after the pressure regulator,  got 63 psi. There is new coils,new
sparkplug wires new sparkplugs,  the cam sensor wasreplaced the crank shaft sensor.
Was replaced,  a valve job was done on the head.i wonder why it wont start? Do you have
any ideas what i can look for.? Thanks. Jesse

64,500

firebird338 answered 8 years ago

Check timing.

Mark helpful

Your Answer:

I am having a problem getting thr 2003 mazada protege to start, it will crank, tries to start, you hear the cyl fire then quits. You do it again and it does the same thing. I hooked up fuel press 1 Answer

I have a problem with a 2003 mazada protege getting it to start. It will crank , you hear the cyl fire but quickly stops. Do it again and it stops firing. I hooked a fuel pressure gage up on the...

2003 Mazda Protege

-

Maintenance & Repair
warm up normally if it's idling, but when I start driving it cools back down. If I'm on an interstate or expressway, the needle will drop down to the cold like it was never warm..i am at a loss and wa 1 Answer

warm up normally if it's idling, but when I start driving it cools back down. If I'm on an interstate or expressway, the needle will drop down to the cold like it was never warm..i am at a loss and wa...

1996 Mazda Protege 4 Dr DX Sedan

-

Maintenance & Repair
The head gasket on a 1995 mazda protege blew, I purchased a new one for 125.00 and had it serviced? for 100.00 and will replace is this good 4 Answers

My uncle owns a garage it has 110,000 miles but only thing wrong head gasket as I mentioned above Uncle giving me the car

1995 Mazda Protege

-

Maintenance & Repair
i have put new fuse in my 1990 madza protege and and it wont crank every thing turns on but the radio still and i have replace all fuses and the radion still didnt turn on after the new fuses 1 Answer

But he main reasons is the engine not turning over so any body pleased help I know the engine is good because I crank it the day before

1990 Mazda Protege 4 Dr LX Sedan

-

Maintenance & Repair
my 2003 Mazda Protege wont start PLEASE HELP!!!!! 4 Answers

hello everyone. I have a 2003 Mazda Protege and for several days now my Mazda has not been driving right. Its been very slow getting up hills and the check engine light is on then it will blink then...

Mazda Protege

-

Maintenance & Repair

Used Mazda MAZDA3

76 Great Deals out of 1,320 listings starting at $1,999

Used Mazda Protege5

1 listing

Used Mazda MX-5 Miata

154 listings starting at $8,496

Used Mazda MAZDA6

12 Great Deals out of 206 listings starting at $4,490

Used Honda Civic

188 Great Deals out of 4,003 listings starting at $440

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

I am having a problem getting thr 2003 mazada protege to start, it will crank, tries to start, you hear the cyl fire then quits. You do it again and it does the same thing. I hooked up fuel press

1 Answer

Your Answer:

Shortcuts

Search Mazda Protege Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

I am having a problem getting thr 2003 mazada protege to start, it will crank, tries to start, you hear the cyl fire then quits. You do it again and it does the same thing. I hooked up fuel press

1 Answer

Your Answer:

Related Questions