frount left out side break pad wearing 3 times as fast as the insidepad on 2011silverado 1500

frount left out side break pad wearing 3 times as fast as the insidepad on 2011silverado 1500 2 answers

I reset my codes after changing my O2 sensor.will it mess up my heating,as it will blow cold air on drivers side and hot on passengers side 4 answers

Checked drivers side blendoor.

1996 Silverado 1500, pulling to the drivers side when hitting the brakes. 1 answer

I started trying to bleed the brakes and discovered there was no fluid getting to the passenger caliper, (front brakes) so I replaced the soft line and tried bleeding again. I had trouble but finall...

I replace the master cylinder and front brake calipers on my 2005 Chevy Silverado 1500 5.3 liter I bled the system numerous times and I still cannot get a break that'll back what would be the reasons 4 answers

I replace the brake calipers and the master cylinder on my 2005 Chevy Silverado 1500 5.3 liter and still cannot get brake pedal back I've bled the system there's times what else could it be

3 Questions about the SES light not going out after a repair 1 answer

01 Silverado 202K miles.. No SES codes last 4 yrs. Noticed trans not going into first..taking off in 2nd. 2 days later while merging into x-way traffic;SES light illuminates.Code generated: P0751.(s...