have a problem with my 1997 ford ranger it wouldn't crank over i changed my ignition switch and it cranks over now but it wont start WHAT DO I DO?

have a problem with my 1997 ford ranger it wouldn't crank over i changed my ignition switch and it cranks over now but it wont start WHAT DO I DO? 2 Answers

I have a 1997 ford ranger 4x4 automatic, what do I need to do to pull it behind my motorhome 1 Answer

Do I have to do anything to the transmission to flat tow my ranger

I have 1994 ford ranger that will cranks over and sounds like it will run but it just want start 4 Answers

I put a new Ignition control module but no change

I have a 96 Ford ranger, 4 cylinder manual and have a problem I can't figure out. I can start the truck every time with no problem it isles great and I can sit there and rev it all day no problem but if I go to drive it I can make it about 1/2 mile and then that's it, ill press the gas petal and it won't do any thing but kill the gas (no gas) but soon as I take my foot off the gas it will idle just fine and rev fine but won't go anywhere unless I let it sit for a few mins and it will start all over. I have replaced the IAC, TPS and today the external fuel filter that was clogged but same thing. Once in a while if I push the clutch in it will stay at a rev for a sec. Please help 5 Answers

96 Ford ranger need help :(

I have a 94 ford ranger it turns over but will not start 2 Answers

O.k. I drove it to work it drove fine then on the way home it started sorta chugging so I put gas in it cause the gas was low it started fine then I got home turned it off came back a few hours l...