get fob to work on 2010 mercury grand marquis

Asked by Jun 30, 2018 at 04:14 PM about the 2010 Mercury Grand Marquis

Question type: Maintenance & Repair

7 Answers

195

Are you looking to program a new fob or get an existing one to work?

1 people found this helpful.

dealer cou;d not get new fob to work

dealer could not get new fob to work

305,225

you can do it yourself...https://www.youtube.com/watch?v=mG3R58-24QU

195

Procedure A: 1.Close all doors, then open drivers door and press the Unlock button on driver’s door while it is open, insert key into ignition. 2.Turn ignition from OFF to RUN 8 times within 8 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. (if the door locks do not cycle, then it was done incorrectly. You must start over by removing key and beginning from step 1) (Off is the position where you can remove your key, RUN is the position just shy of starting your car.) 3.Within 10 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 5. 4.Within 10 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 4. for all other remotes. 5.Turn ignition to OFF. Locks will again cycle to indicate end of programming mode. [*If this does not work try the procedure with the door closed.]

195

Procedure B: 1. Fasten seatbelt and close all doors 2. Turn the ignition from OFF to RUN 4 times within 3 seconds. 3. Turn the ignition OFF. The system will chime to confirm programming mode. 4. Within 10 seconds, press and hold any button on first keyless remote. The system will chime once to confirm programming. 5. Within 10 seconds, press and hold any button on second keyless remote. System will chime once to confirm programming. 6. Turn ignition to RUN to exit programming mode. Please note: All steps should be performed in fairly rapid succession. If you never get the initial chime or door lock cycle, that means the vehicle has never entered programming mode. You should remove key from ignition, open and close the door and start over.

195

I hope one of these two procedures help. The video Tom supplied a link to is for procedure A.

1 people found this helpful.

Your Answer:

Grand Marquis

Looking for a Used Grand Marquis in your area?

CarGurus has 7 nationwide Grand Marquis listings and the tools to find you a great deal.

Postal Code:

Mercury Grand Marquis Experts

  • #1
    Tracy Hooks
    Reputation
    6,100
  • #2
    kbro
    Reputation
    2,260
  • #3
    Js08016
    Reputation
    2,180
View All

Related Models For Sale

Used Lincoln Town Car
11 listings starting at $6,495
Used Chevrolet Impala
22 Great Deals out of 879 listings starting at $2,894
Used Cadillac DTS
17 listings starting at $10,995
Used Dodge Charger
45 Great Deals out of 925 listings starting at $3,500
Used Ford Mustang
34 Great Deals out of 1,238 listings starting at $4,685
Used Honda Accord
35 Great Deals out of 1,657 listings starting at $3,490
Used Ford Taurus
18 Great Deals out of 370 listings starting at $3,900
Used Ford F-150
132 Great Deals out of 11,559 listings starting at $3,900
Used Toyota Camry
31 Great Deals out of 2,072 listings starting at $2,450
Used Chrysler 300
32 Great Deals out of 1,025 listings starting at $3,500
Used Chevrolet Tahoe
11 Great Deals out of 793 listings starting at $5,900
Used Chevrolet Silverado 1500
95 Great Deals out of 11,104 listings starting at $4,950

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.