1997 mustang gt installation of 1989 5.0 engine

Asked by eric71961 May 13, 2014 at 11:44 AM about the 1997 Ford Mustang

Question type: Car Customization

what is needed to instal 1989 mustang gt 5.0 engine into a 1997 mustang gt?

4 Answers

57,865

The Long Block is basically all the same. Get the necessary gasket kits, take all of the covers and accessories off of the old motor and put on the new one. Intake and exhaust manifolds, oil pan ect.

1 people found this helpful.
40

No it's not. The long block is a completely different type of motor. A 97 gt has a 4.6 dohc 2 valve modular v8 backed by either a 4r70w auto or a Borg Warner 5spd manual. An 89 fox has a 5.0 sohv pushrod style v8 backed by either an aod auto or I believe a bw 5spd. The k member is similar but you will need mounts for a 5.0, complete engine, if you have a 5spd you will need the matching bell housing pattern version of trans so one from a v6 (which you will have to switch flexplates etc) or one from a 5.0 car, also needed is a computer to control it all. Either u need a trans controller for an electronic auto (or a stock auto ecu for your trans engine combo) or a manual trans with a manual stock ecu for your engine, also needed wiring supplies, fluids, gaskets etc. There's also the issues of the upgraded cooling system so either you'll need the radiator from the car the engine is from of you will need a "custom" setup to control fan and route coolant and also trans fluid as the 97 cars have a trans cooler behind the radiator. while we're on this subject the 302 engines used clutch fan. Post 95 cars had electric. Make sure your pump can displace enough fuel. Also make sure if the engine is a return style fuel system that the car is too or else you will have to convert that. The 5.0 will most likely fit under the hood but it may also be a couple inches too tall depending on intake used and the style hood on your car etc. Sorry to overload you but the other guy sent you down the wrong path and for that I'm sorry

3 people found this helpful.
40

Also I know this post is old but I don't want other people getting the wrong ideas

1 people found this helpful.

My 89 5.0 is already in the 95 gt but it's not the stock set up I have a gt40 lower intake and what is called a bread box upper and 70mm throttle body so struggling in several different areas what size injectors do I need what about the maf sensor please enlighten me on what I need to do to make this work

Your Answer:

Mustang

Looking for a Used Mustang in your area?

CarGurus has 1,603 nationwide Mustang listings starting at $6,500.

Postal Code:

CarGurus Experts

  • #1
    Gene Arnett
    Reputation
    3,130
  • #2
    Bob Beaman
    Reputation
    2,680
  • #3
    rst429
    Reputation
    2,590
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used Chevrolet Camaro
25 Great Deals out of 511 listings starting at $11,500
Used Chevrolet Corvette
29 Great Deals out of 593 listings starting at $10,989
Used Ford F-150
363 Great Deals out of 12,802 listings starting at $599
Used BMW 3 Series
66 Great Deals out of 1,237 listings starting at $3,995
Used Ford Mustang SVT Cobra
7 listings starting at $24,879
Used BMW M3
9 Great Deals out of 82 listings starting at $15,850
Used Jeep Wrangler
144 Great Deals out of 5,930 listings starting at $8,995
Used Honda Civic
190 Great Deals out of 4,208 listings starting at $2,916
Used Toyota Supra
3 Great Deals out of 51 listings starting at $50,500

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.