Fires but won't start
1993 gmc suburban k2500 won't start after
new fuel filter, cap and rotor. It turns over
but won't start. Any suggestions? There's
Check your spark plug wires and make sure their in the right order.
Otherwise fuel line might need to be adjusted to flow
If you installed a new distributor cap did you check and make sure you were at tdc and your distributor was set at wire 1 along with tdc on your crank pulley(should be marked with a dash across it and tdc would be at 12 o'clock exactly. You may need to pull the distributor out a few inches and move the teeth once to the left or right
Looking for a Used Suburban in your area?
CarGurus has 1 nationwide Suburban listings and the tools to find you a great deal.
Search GMC Suburban Questions
GMC Suburban Experts