I have a 1997 GMC Sierra that I put a 97 motor from a Blazer in but it didn't have the crankshaft sensor I used to talk and take and heads from this year

I have a 1997 GMC Sierra that I put a 97 motor from a Blazer in but it didn't have the crankshaft sensor I used to talk and take and heads from this year 1 Answer

I have a 1990 GMC Sierra with a 305, I need to put a new engine in it and would prefer going back with a 350. Can I Put any GM 350 in it from the 90's? 3 Answers

My 1990 305 blew up on me and I would prefer to go back with a 350 but can it be any 350 from the 90's? If so what year would be best, I have heard good things about the 5.7 Vortec's. Also its a 5 s...

I have a gmc sierra 07 model, 4 whl drive with a 6 in lift. I put it in drive and push the gas and it goes fine but will not shift from 2 to 3 at all. Sometimes i put it in gear and it jerks hard and 1 Answer

My truck don't wanna shift from 2nd to 3rd, and sometimes won't go in 1st. Also at times when going from park to drive or to rev it jerks real hard and dies. U can hear the trans when u change fr...

Iv got a 98 gmc 1500, just put a new jasper 350 in the other day and cant get started. i have fuel, compression, and spark, i know i have to time it with the computer once its started. but i cant get it started. any ideas? im sure i have it timed right, but also this distributer does not have the timing markings. 6 Answers

1998 GMC 1500 sierra 5.7 350

I have a 1989 350 5.7 TbI and I have a 96 GMC 1500 with a 305 5.0L Vortec with over 250,000 miles can I use the the heads from the Votec 305 5.0L on the 350 5.7L TBI? If so should I change the cam if so what do you recommend this is gonna be a show/driver what kind of cam and lifters do you suggest and what all do I need to do the heads (valve job, replace lifters, rockers) and what should I do to the block seeing that it only has a few miles since rebuild 3 Answers

I have a 1989 350 5.7 TbI and I have a 96 GMC 1500 with a 305 5.0L Vortec with over 250,000 miles can I use the the heads from the Votec 305 5.0L on the 350 5.7L TBI? If so should I change the cam ...