Remove master leave lines attached, once out of the way you'll see a rod sticking out of master, disconnect battery place a heavy item on brake pedal the rod sticking out use good pair of pliers or vice grips enough to secure it be careful not to mar shaft,the tip of rod has a nipple that is adjustable screw in and test may need to do this a couple times to set proper depth of rod in master cyl back.
Are the brakes always going to be an issue on the 99? I replaced every part of the front brakes when I bought the love of my life. 3 years layer the rotors are warped.
1999 Dodge Durango SLT 4WD
-
Maintenance & Repair
On my 2002 dodge durango , when i tap the brakes it stops as if i slammed the brakes what should i do?
2002 Dodge Durango
-
Maintenance & Repair
I have replaced all the parts of the brakes system and the suspension system but still my car jumps when I press the brakes
2002 Dodge Durango SLT RWD
-
Maintenance & Repair
My left rear brake drum sticks and smells and gets pretty hot. I know my 99 Durango has rear assist braking but should you smell brakes and should it get hot to the touch?
1999 Dodge Durango SLT 4WD
-
Maintenance & Repair
My brakes on my 05 dodge durango keeps locking up. I have changed the brake booster and the master cylinder on but it keeps locking up. But once I let the car sit for a minute they'll unlock until ...
2005 Dodge Durango
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.