where is the camshaft position sensor located on a 1995 GMC K 2500 and Starter question

Asked by DEC Apr 05, 2010 at 11:31 AM about the 1995 GMC Sierra C/K 2500

Question type: Maintenance & Repair

I replaced the starter on my 95' GMC 4x4 and now it sounds like a lawn mower when the starter turns.The truck will start after about four cycles of the starter and runs fine.Is this a normal sound on the newer starters? Does the camshaft sensor cause a problem like the sound explained and where is this sensor located? Thanks.

3 Answers
995

Freemon answered 14 years ago

starter may need to be shimmed...either that or youve got the wires hooked up wrong..power on power will grind the starter....usually if a cam/crank sensor fails a vehicle wont even start.

Mark helpful

DEC answered 14 years ago

The problem was the battery.I purchased a battery at the same time and was sold one with too low cranking amps, so it would not turn the starter fast enough.Also the 95 model does not have a cam sensor.Thanks

Mark helpful
1,425

DanTheMan5160 answered 12 years ago

Starter needs shimmed or one or more removed.Could be the wrong starter splines.Wrong starter.Take the starter back exchange it for a 1994 starter.Just because,your title says it's a 95 it's a 95.It was made in 1994.I had the same problem.Ended up getting a stater from the later yr worked like a charm.You could of also cracked the fly wheel,Transmission housing.Check your fly wheel teeth count and condition as well.I would put money on it and say you have the wrong starter.

Mark helpful

Your Answer:

Related Questions

  • where is the camshaft position sensor located on a 1995 GMC K 2500 and Starter question 3 Answers

    I replaced the starter on my 95' GMC 4x4 and now it sounds like a lawn mower when the starter turns.The truck will start after about four cycles of the starter and runs fine.Is this a normal sound on ...

    1995 GMC Sierra C/K 2500

    -

    Maintenance & Repair

  • 89 gmc k2500 won't start after it warms up 4 Answers

    Hi I have a 89 gmc k2500 5.7 tbi the truck will start up and run once it warms up and I shut it off it will not fire back up cranks over fine It's got fuel All new distributor plugs wires coil MAP...

    1989 GMC Sierra C/K 2500

    -

    Maintenance & Repair

  • does anyone know why a 2500..6.5 turbo motor.....would have smoke coming from dipstick and intake? 1 Answer

    dip stick having smoke coming out....intake around filter creating smoke....but truck isnt running bad... a bluesish color i believe........

    1996 GMC Sierra C/K 2500

    -

    Maintenance & Repair

  • 1995 gmc 2500 sle will not shift to overdive 1 Answer

    Had the transmission replaced < 1 year ago with a re-manufactured one. Now it wont shift into over drive. user to get 50 mph at about 1500 rpm approx, now best is 50 mph at 2000 rpm approx.

    1995 GMC Sierra C/K 2500

    -

    Maintenance & Repair

  • 1996 GMC Sierra K2500 1 Answer

    Was driving my 1996 GMC K2500 pickup yesterday. In a blink of an eye I felt gear loss, RPMs spiked to redline. Shifting from gear to park im having a grinding noise. Played with my gears a bit when...

    1996 GMC Sierra C/K 2500

    -

    Maintenance & Repair

Sierra C/K 2500

Looking for a Used Sierra C/K 2500 in your area?

CarGurus has thousands of nationwide listings and the tools to find you a great deal.

Postal Code:

Shortcuts

Search GMC Sierra C/K 2500 Questions

CarGurus Experts

  • #1
    Gene Arnett
    Reputation
    20
  • #1
    Magnus Atlasson
    Reputation
    20
  • #1
    rrussellus
    Reputation
    20
View All

Find great deals from top-rated dealers

Search

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.