95 GMC was running and just cut off have put new
distributor change coil still cannot get no fire need
I put new distributor with everything new inside new button new cap and I change the external coil when you say the big wire going to distributor you're not talking about the wire that comes off the coil right
I know rotor button is turning fuel pump is coming on just no fire I will check that wire when I get home if I get off in time
I just check the voltage on The Wire coming out the main harness the highest I can get is a 0.12
I checked the big plug that has four wires not the one coming off the coal with 2 wires
Ok it will be tomorrow
I just unplugged the main wire coming to the coil from the wiring harness and I'm only getting .02
I have check the voltage on a and b and a b c and d and cannot get 12 volts
Yes i have i had someone else tell me it sounds like the computer
It's your ICM! Under the distributor cap you will find it. Two connectors to it. Replace that
Looking for a Used Sierra C/K 1500 in your area?
CarGurus has thousands of nationwide listings and the tools to find you a great deal.
Search GMC Sierra C/K 1500 Questions
GMC Sierra C/K 1500 Experts
Find great deals from top-rated dealersSearch