Why is my car over heating?

Asked by artgonzalez6289 Jun 29, 2014 at 04:24 PM about the 1960 Ford Ranchero

Question type: Maintenance & Repair

I have a 1960 Ford Ranchero. It had a straight 6 cylinder. I took it off and put a 289, i
put a rack and pinion on it, i put power steering, and i put ac in it. When i did all this i
ran out of room in the motor compartment so i moved the radiator an inch forward and
it's right next to my condensor. I probably have a have inch between my radiator and
condensor. I put a 17 inch electric fan, four row aluminum radiator and it's getting hot
on me. Did i do something wrong? Is there a solution to this problem?

3 Answers

did you put in a bigger radiator, fan blade could be wrong, fan shroud, add a good electric fan.

Usually when a vehicle has AC and uses electric fans there are two fans. One comes on with coolant temp. and the other comes on whenever the AC compressor is turned on. You should be able to run a 180 degree thermostat with your combination and you may need to bleed the system of air. This can be done by removing the upper heater hose from the engine and pour coolant into the hose until coolant comes out of the engine outlet with the engine NOT running. Also, what do you consider overheating? What is the temp. going to? It should be around 180 to 195 degrees.

Your Answer:

Ranchero

Looking for a Used Ranchero in your area?

CarGurus has 2 nationwide Ranchero listings and the tools to find you a great deal.

Postal Code:

CarGurus Experts

  • #1
    MrBlueOval
    Reputation
    320
  • #2
    james sparrow
    Reputation
    190
  • #3
    Michael Tutty
    Reputation
    180
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.