what size screws are used to hold the condenser and points in place in my 1962 ranchero distributor?

Asked by Feb 04, 2016 at 07:29 PM about the 1962 Ford Falcon

Question type: Maintenance & Repair

rebuilding my distributor and the screws for the points and condenser are
missing. need to know what size and thread,etc.

2 Answers

34,605

I would take the distributor into a good hardware store and try out different screws.

83,015

This site has a kit for about seven bucks, I once used the scews in the kit for a 59 ford distrutor I rebuilt and they worked. http://lbcunited.com/earlyford2/index.php? manufacturers_id=10&sort=1a&filter_id=273

3 out of 3 people think this is helpful.

Your Answer

Add photo

Related Questions

  • 1963 FORD falcon runs rough, really jumpy when given gas. not stable? 10 answers

    i have a 63 ford falcon with a 68 170 ci engine block, auto 2 speed tranny. recently installed a new distributor, was worn bad, points burned ect. installed the new one, timing is correct and everythi...

    1963 Ford Falcon

    -

    Maintenance & Repair

  • 65 289 stumbles at lower rpm during accelleration. 7 answers

    I rebuilt the Autolite 2V carburetor, put in new points, condenser, rotor, cap, and vacuum advance (generic for an M2100). Vacuum at idle is 21 in/m. The vacuum is hooked up to the ported inlet on the...

    1965 Ford Falcon

    -

    Maintenance & Repair

  • High Altitude adjustments to carb 3 answers

    I have the 170 CI engine and am driving this vehicle predominantly at 6,000 to 7,000 feet altitude. The nearby town of Denver is still 5,000 feet. I remember re-jetting some older cars many years ag...

    1963 Ford Falcon

    -

    Maintenance & Repair

  • 79 ford ranchero GT 351 windsor point set 9 answers

    This car has a 351 windsor in it. and every where we look we cannot find the specs for the engine.. automatic. We need the specs for the points and sparkplugs, Can you give me some help?? Thanks Cy...

    1979 Ford Ranchero

    -

    Maintenance & Repair

  • Removal of Ignition pack on rear of distributor? What type of heads do the machine screws have? 2 answers

    I do not want to pull the distributor...I cannot see the screw heads and need to know what type of tool I need.

    1986 Ford Ranger

    -

    Maintenance & Repair

Shortcuts

Search Ford Falcon Questions

Ford Falcon Experts

#1 Troy Witt
Troy Witt
Reputation 470
#2 MrBlueOval
MrBlueOval
Reputation 340
#3 falconman13
falconman13
Reputation 120
View All

Related Models For Sale

Used Ford Thunderbird
13 listings starting at $17,995
Used Chevrolet Impala
24 Great Deals out of 820 listings starting at $2,600
Used Chevrolet Corvette
405 listings starting at $8,993