MAY RUBBER PARTICLES IN THE COOLING SYSTEM BE A PROBLEM?

10

Asked by cbbv Aug 28, 2015 at 06:52 AM about the 1990 Opel Corsa

Question type: General

The green coolant/antifreeze in the car  was clean and clear.
But while i was connecting new hose coupler(attached photo)between two cooling hoses(in order to build a
shape of hose that i didn't find in the stores)i was creating some rubber particles in the hoses(that was made
from the pushing action of the hose coupler into the hoses).
I forgot to wash the final made hose and i connected it back to the car,but while i added fresh anti freeze i saw
some rubber particles in the expansion tank and now they are flowing in the cooling system.
My question:May these rubber particles in the cooling system be a problem?
The coolant is new and all the system was clean.There are only those rubber particles that made by me,since i
forgot to wash the inside of the hose before connecting them back.
And i really would like to avoid making flush to the system just because of that(as i mentioned,the coolant was
new and clear before)if it may not be an issue.

Thanks in advance.

7 Answers

188,225

when you say some, do you mean just a few pieces? how big are the pieces? I'm assuming small because they flowed thru the cooling system to get in the tank. If there are not many and they are small, I would think it would be ok. But if there is allot and the pieces are bigger they could clog the cooling system. To be on the safe side I would flush the system out again..

9,755

do like joemom said...... better safe than sorry

1 people found this helpful.
10

I made this hose to replace the hose that connected between the expansion tank and a metal flange ,so the particles were not need to flow through the system cause they were close to the tank from the beginning. When i add coolant to the expantion tank,it was washed the inside of the hose and the rubber particles,that were washed from the hose could be seen at the expantion tank. Now,after the car was driving some miles,the rubber particles are slowly disappeared from the tank. I don't know what is considered big and what is considered many. This is the reason that i attached the photo,in order that you can estimate,from your experience,how much particles,could be released when doing this fitting on the hoses(btw the hose coupler is connected between an old hose and new hose,so most of the particles,i guess,come from the old one). Is there any checking method to know,if these amount of rubber particles could be a problem or not?

9,755

that little bid should not cause any concern.

1 people found this helpful.
188,225

No way to check, if you want to feel better then flush the system again..

I like to know my cosa bakie when im driving it jacking somethimes is nt going at all

Your Answer:

Corsa

Looking for a Used Corsa in your area?

CarGurus has thousands of nationwide listings and the tools to find you a great deal.

Postal Code:

CarGurus Experts

  • #1
    Clifford Netshilonwe
    Reputation
    3,690
  • #2
    Somila Manqupu
    Reputation
    2,580
  • #2
    GuruDXPQG
    Reputation
    2,580
View All

Find great deals from top-rated dealers

Search

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.