what type of transmission fluid do i used in a 1963 two speed comet
Asked by doggoneitgarage Apr 28, 2011 at 01:52 PM about the 1963 Mercury Comet
Question type: Maintenance & Repair
i was told that type f was the right fluid for this car. it is a 1963 mercury comet with a 144 cu engine and two speed trans.I change the fluid and now i don't have reverse is it possible that there to much fluid in it or is it the wrong type of fluid.it ran grate in the pass.can you please inlight me
4 Answers
Use the original "Type F" or the newer "Type FA".
Fluid level should be check when hot, idling in park. Often, wear has already occured in transmission and is now evident with new, clean fluid. The fluid acts as a cleaner and the act of changing the fluid cleans out sludge.
GregPowell answered 12 years ago
Usually the type of fluid is marked on the dipstick, if you look close you may find it there. Most ford vehicles 1975 and earlier used the F-TYPE fluid. It's always best to stick with the original manufacturer's suggested type. I've found it hard to find the F-TYPE in the bigger 5 quart containers lately. Wal-mart only carries it in quart containers around here. Prices have leaped on transmission fluid like everything else, so be prepared..
You won't like my answer but here it is...My 1964 Mercury Comet with the 200 inline 6 and 2-speed Merc-O-Matic (same as your Ford-O-Matic) was built before Ford went exclusively to Type F tranny fluid. As such, I had to use Type A fluid instead (Found on Amazon.com) This was based on the information I got from the people at Dearborn Classics. They simply said: if the tranny is original and still has the softer bands in it, use Type A...If the tranny has been rebuilt with the newer parts, use Type F.
