master window switch

If your car falls within the production date, there is a recall to replace the wiring harness in the door. "NOTE: This recall applies only to the above vehicles built from November 01, 2007 through November 07, 2008 (MDH 110122 through 110723)." The date of production can be found on a white sticker on the drivers door...

I had the same problem on my 09 (it was not on the K07 recall list) After much searching, I purchased the K07 recall wiring kit, CBJ1K072AA Door Wiring Harness Package (with power windows express up/down feature / sales code JSC). With no express up/down the number changes to xxxxxxxx1AA . These are readily available online at a big discount as "old stock". I paid under $30 plus shipping. You get both sides. Taking the inner door panel off can be a bit of a chore but my local body shop installed it for $50. They now work perfectly.

I have an 09 Journey which was on the recall list. I finally had the time to take it in to get the wiring harness recall done at dealership and they did it. Less than week later, my window master switch doesn't fully function. Only the back windows work!! Has been too cold in Chicago, havent used from windows, not sure if the switch failure happened at same time of recall fix... any ideas?

its a programming issue

My 2009 Dodge Journey has the same issue, rear windows are the only ones working, remote mirrors controls do not work neither do the door lock control's. Called about the recall they said my car does not fall within the issue date...UGG same car has no heat on the passenger side and all doors and motors are working correctly. BIG POS

I have an 09 also same issue with driver panel back windows r the only thing I can control it does not fall under recall either.. and dodge wants 55 $ just to look at it. Also if I turn my steering wheel to far to the right it makes a noise. Also when using air conditioning or heater it vibrates and is very loud. I will never purchase another journey. Simply because of these issues.

I found just a broken Red wire in the harness after I replaced it. I found the recall parts on Ebay for 45 shipped to my house since all of the local deals would not sell me the part. They said the part needs to be installed by the dealer and the part cost 125 with a 75 install charge. Now I am onto the heat issue, heat only on the drivers side and all of the motors are working correctly. Yay I think it is the heater core is half plugged DODGE JOURNEY = JUNK!

@rchadd did you ever figure out why your heat did not work. Mine is doing the same thing.

Took my car to wallmart got new different sized tires no more noise with right turns. And they rotate for free with purchase.

@italia1246 The heat was a plugged heater core, after a flush going the opposite flow direction heat worked fine.

I am driving Dodge Journey 2012.initially the issue was intermittent but it is permanent now. All four switches are not working. when I press the switch it generates continuous clicking sound. Please advise

irfancidiki - i am having the same issue with my car. i don't have the money to spend on a buch of different parts only to find they are not the issue. did you ever find out what the issue was? mine has been like this for 5 months. it was intermittent for about 4 months prior to the windows not working at all. I have control over everything else but the windows on that switch.

@irfancidiki and @yiipam ... did you guys ever figure it out? and about how much did it cost to fix? I'm having the same issues on my 2012 Dodge Journey.

Wow any help guys I'm having the same issue with my 2012 journey. I've replaced the master switch but now same clicking humming noise. Can operate licks and mirrors but no windows at all..

amanda did you ever find out what it was in your 2012 journey. I am having the same issue. ty

wire will be broken inside the drivers door a post it only takes a tiny amount of wire to be bare and will short the ecu in the door wich controls all the front drivers door intruments had the same issue bob uk

I have a 2007 Nitro and an having the same issues. My husband has replaced both panels (both windows are auto up/down). When that didn't work, he replaced the wiring harness. It worked OK for about a week..... And now the same issues. We just don't know what to do at this point. It's it a fuse? A faulty wire in a different location? Could the new panel(s) be bad? Ugh..... Help!!!!! Please

How do you program the master window controller driver side after replacing it on the 2009 Dodge Journey?

same problem with 2012 sxt journey. got tired of trying to find answers for no power to drivers door only back windows working. removed door panel, good video on you tube removed harness bracket on front of door and disconnected harness from door post. checked for power at post connection, heavy red wire, had power there, plugged connections back together and checked red wire where itr appeared from boot in door. no power there. unplugged again and shoved boot up wire to expose more wire. sure enough the red wire was broken looked brittle. exposed ends , put in joiner and there it was. works great and only took about half hour most due to bumbling along..HOPE THIS HELPS

broken ground wire in "A" post door side. spliced wire. works great

all windows inop. after splicing new wire at "A" post on the door side, window operation returned