1996 Dodge Ram 1500 4x4 5.9

What's it doing? Turning over but not starting?

Yes . And when I pull a spark plug it's soaked with fuel

Are you sure the plugs are firing? Was it doing the same thing before you replaced the parts?

Yes their is fire . I had a mis fire & autozone said it was my plugs . I changed them and it ran great for 4 days then this

http://autorepair.about.com/library/firing_orders/bl-fo-5900.htm -- double check the plug wire locations.

I've triple checked them .

Ok then dis regard my last post.

Ok thank you

Is your check engine light on? If so what are the codes?

No . I even have a friend that has a scanner & still can't get any info

Was you driving it and it just went dead or did you go to start it and it started doing this?

I drove it about 6 miles to Home Depot . When I can out this is how it was

Possibly egr valve stuck open. If it sticks open it can cause this sort of issue.

The scanner said it was good . But where is it located ? Thank you for your

From what I have found if yours has one it should be on the passenger side of the intake near firewall. I am finding mixed results tho. Some do have them and some don't. Dodge did some changes around that year model.

I'm not sure what you sayn . Can you send me a picture of it please

It should be right behind your last fuel injector on the passenger side of the intake. Right next to the firewall.

This one might be better. It's right at the point of the pin.

Ok Thank you I'll try it today .

Check this out too

Okay . I checked all vacuum lines but I will again .. Thanks again for your help

Does the breather assembly have to be on before it will start ?

I don't see it anywhere . I must not have it . I have a 5.9 360

Crank position sensor might b bad

Catolack converter stopped up mine was it done The same thing